Chiligreen B5130 Manual de usuario descargar pdf (Pagina 117)

Upgrading The Computer

Upgrading the System Memory (RAM) 6 - 11

7. Pull the latches to release the second module if necessary.

8. Insert a new module holding it at about a 30° angle and fit the connectors firmly

into the memory slot.

9. The module’s pin alignment will allow it to only fit one way. Make sure the module

is seated as far into the slot as it will go. DO NOT FORCE the module; it should fit

without much pressure.

10. Press the module in and down towards the mainboard until the slot levers click into

place to secure the module.

11. Replace the bay cover (see sidebar) and screws (make sure you reconnect the

fan cable, and hook it under the retaining pins, before screwing down the

bay cover).

12. Restart the computer to allow the BIOS to register the new memory configuration

as it starts up.



Cover Pins

Note that the computer

has five cover pins.

These pins need to be

aligned with slots in the

case to insure a proper

cover fit, before screw-

ing down the bay cover.

Figure 6 - 9

Cover Pin

Alignment

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 247 248

Sin comentarios

Chiligreen B5130 Manual de usuario Pagina 117